We provide lightning protection inspections for commercial, industrial and public-sector buildings.

Our lightning protection inspection service can include visual checks, continuity testing, earth resistance testing and assessment of the existing lightning protection system against the relevant requirements of BS EN 62305.

Following the inspection, you can receive a report detailing the condition of the system, test results and any defects or remedial work identified.

Contact us to arrange a lightning protection system inspection in Lincolnshire.

How much does a Lightning Protection Inspection Cost in Lincolnshire?

Lightning protection inspections in Lincolnshire typically cost £300 to £500 for smaller commercial properties, while larger industrial sites, complex systems and high-rise buildings can cost £1,500 or more.

The price for inspecting lightning protection systems will depend on:

• Building size and height
• Number of lightning protection systems
• Number of test points
• Accessibility
• Complexity of the installation
• Earthing arrangements
• Testing requirements
• Reporting requirements

Any repairs or remedial work identified during the inspection would normally be priced separately.

Contact us with details of your building and existing lightning protection system for a more accurate price.

What does a Lightning Protection Inspection Include?

A lightning protection inspection can include:

• Visual inspection of the system
• Inspection of air termination components
• Down conductor checks
• Joint and connection checks
• Earth termination inspection
• Continuity testing
• Earth resistance testing
• Inspection of accessible bonding
• Identification of damaged or corroded components
• Review of previous inspection information where available
• Recording of test results
• Inspection report
• Recommendations for remedial work

The exact inspection will depend on the building and type of system installed.

If defects are found, these can be recorded within the inspection report so that appropriate repairs can be arranged.

How Often should Lightning Protection Systems be Inspected?

Lightning protection systems in Lincolnshire should be inspected and tested periodically, with the appropriate interval determined by the system, site conditions and applicable standard.

The inspection schedule can also be influenced by the building type, environmental exposure and condition of the installation.

Additional inspections may be appropriate following significant building alterations, suspected damage or changes that could affect the lightning protection system.

If you are unsure when your system was last inspected, contact us to discuss the existing installation and testing history.

BS EN 62305 Lightning Protection Inspection

We provide lightning protection inspections with reference to BS EN 62305, the standard used for lightning protection systems in the UK.

An inspection can assess the accessible components of an existing system, record test results and identify defects that may require attention.

Maintaining suitable inspection and testing records can also help building owners and facilities managers keep track of the condition of the system over time.

Commercial Lightning Protection Inspection in Lincolnshire

We provide lightning protection inspections for commercial properties in . Properties can include:

• Offices
• Retail premises
• Hotels
• Warehouses
• Distribution centres
• Commercial developments
• Large residential developments
• Mixed-use buildings

Inspections can be arranged as part of planned building maintenance or where the condition and testing history of an existing system needs to be established.

Industrial Lightning Protection Inspection in Lincolnshire

Industrial buildings can contain extensive electrical systems, machinery and other equipment, making the condition of the lightning protection system an important consideration.

We can inspect lightning protection systems at:

• Factories
• Manufacturing facilities
• Industrial units
• Processing facilities
• Storage facilities
• Energy sites
• Large warehouses
• Engineering facilities

The inspection requirements will depend on the size and complexity of the site and the lightning protection system installed.

Lightning Protection Inspection for Schools and Public Buildings in Lincolnshire

We can carry out lightning protection inspections for schools, colleges, healthcare premises, local authority buildings and other public-sector properties in Lincolnshire.

Inspections can be coordinated around building access requirements and existing maintenance schedules.

Following testing, the findings can be documented along with any defects or recommended remedial work.

What is Checked During a Lightning Protection Inspection?

The lightning protection inspection in Lincolnshire focuses on the components that allow the lightning protection system to intercept and safely conduct lightning current.

Air Termination System

Air termination components are visually checked for their condition and any obvious signs of damage, movement or corrosion.

Down Conductors

Down conductors provide a path between the air termination and earth termination systems.

Accessible conductors and connections can be checked for damage, deterioration and continuity.

Earth Termination System

The earth termination arrangement forms an important part of the lightning protection system.

Testing can be carried out to assess the electrical characteristics of the earthing system and record the results.

Connections and Bonding

Accessible joints, connections and bonding arrangements can be checked for signs of deterioration, damage or disconnection.

What Testing is Carried Out on a Lightning Protection System?

Testing can include continuity and earth resistance measurements alongside the visual inspection.

• Continuity Testing: Continuity testing in Lincolnshire can be used to check whether the required electrical path remains continuous through relevant parts of the lightning protection system.
• Earth Resistance Testing: Earth resistance testing is used to assess the performance of the earth termination system.

Test results can be recorded and compared with previous inspection information where available.

The testing required will depend on the type and configuration of the system.

What Problems can be Found During a Lightning Protection Inspection?

A lightning protection inspection can identify problems that may not be obvious during normal building use.

Common issues can include:

• Corroded conductors
• Loose connections
• Disconnected conductors
• Damaged components
• Missing components
• Deteriorated joints
• Problems with earth connections
• Alterations affecting the existing system
• Physical damage from other building works
• Test results requiring further investigation

The report should clearly identify defects so that the necessary remedial work can be considered.

What Happens if a Lightning Protection System Fails an Inspection?

If problems are identified, the lightning inspection report can detail the defects and any recommended corrective work.

Depending on the findings, remedial work could involve:

• Replacing damaged conductors
• Repairing connections
• Reconnecting components
• Improving earthing arrangements
• Replacing corroded components
• Restoring missing system elements
• Further investigation or testing

The extent of the work will depend on the condition of the existing system.

Lightning Protection Remedial Work

We can help arrange remedial work where defects are identified during a lightning protection inspection.

Rather than replacing an entire system unnecessarily, the existing installation can be assessed to establish which components require repair, replacement or further investigation.

Once remedial work has been completed, further testing can be carried out where required.

Lightning Protection Inspection Reports

Following the inspection and testing, a lightning protection report can be produced to document the condition of the system.

Depending on the scope of the inspection, the report can include:

• Site and system details
• Components inspected
• Test results
• Defects identified
• Observations
• Recommended remedial work
• Inspection date

Keeping previous reports can make it easier to monitor changes in the condition and test results of the system over time.

Contact Us

Looking for a lightning protection inspection in Lincolnshire?

Contact us with details of your building or site and, if available, your previous lightning protection inspection report.

We can discuss the inspection requirements, testing, reporting and any remedial work required for your lightning protection system.

Frequently Asked Questions

What is a Lightning Protection Inspection?

A lightning protection inspection checks the condition and performance of an existing lightning protection system.

Lightning protection systems are installed to provide a controlled path for lightning current and help protect structures and their contents from the effects of a lightning strike.

Over time, conductors, joints, earth connections and other components can deteriorate, become damaged or be altered during other building work.

Regular inspection and testing can identify these issues before they affect the integrity of the system.

How Long does a Lightning Protection Inspection Take?

The time required depends on the size of the building, number of test points, system complexity and accessibility.

Smaller systems may be inspected relatively quickly, while larger industrial sites and multi-building facilities can require considerably longer.

Do you Provide a Report After the Inspection?

Yes. Inspection and testing results can be documented in a report, including defects and recommended remedial work where applicable.

Can you Inspect an Existing Lightning Protection System?

Yes. Existing systems can be inspected and tested even where they were installed by another contractor.

Providing previous inspection reports or system drawings can be helpful where these are available.

Can you Inspect Lightning Protection on Industrial Sites?

Yes. Lightning protection inspections can be carried out on factories, warehouses, manufacturing facilities and other industrial properties.

Can you Carry Out Lightning Protection Repairs?

Remedial work can be carried out where damaged, deteriorated or defective components are identified.

The work required will depend on the findings of the inspection.

Should a Lightning Protection System be Inspected After Building Work?

An additional inspection may be appropriate where roofing, extensions, plant installation or other building work could have altered or damaged the lightning protection system.

What Information do you Need to Price an Inspection?

Useful information includes:

• Property type
• Building size
• Building height
• Number of buildings
• Existing system information
• Previous inspection report, if available
• Site access requirements

If you do not have all of this information, contact us with the details you have.

Can you Inspect Multiple Buildings on the Same Site?

Yes. Multiple lightning protection systems or buildings can be included within the same site inspection.

This can be useful for industrial estates, schools, healthcare facilities and other sites containing several buildings.

Find More Info

Make sure you contact us today for a number of great Lightning Protection Inspection services in East Midlands.

Here are some towns we cover near Lincolnshire

Lincoln, North Hykeham, Barking

For more information on Lightning Protection Inspection in Lincolnshire , fill in the contact form below to receive a free quote today.